Samco Industrial Merchants Logo
 
Shopping Basket Shopping Basket
0 items £0.00
View Your Order
  • SHOP BY PRODUCT
    New Products
    • The Workwear Range
    • Special Hazard Workwear
    • PPE (Personal Protective Equipment)
    • Foot Protection
    • Hand Protection
    • Work Place Safety
    • Special Offers
    • Sale & Clearance Lines
    • Honeywell Buy Honeywell Shop
  • SHOP BY BRAND
  • SPECIAL OFFERS
  • SALE & CLEARANCE
  • LEISUREWEAR
  • MY ACCOUNT

EN Standards

This is a guide to the current classifications for Personal Protective Equipment

This guide will help you understand the many codes relating to Personal Protective Equipment (PPE) and the level of protection afforded by the products that bear them.

CE – All PPE should carry the CE Mark appearing in the form of the letters “CE” which is an abbreviation for Conformitι Europιenne (French for European Conformity). Any product bearing the CE mark conforms to all current requirements and other applicable provisions imposed upon it by European legislation, and that the product has been subject to the appropriate conformity assessment procedure(s).

SAFETY FOOTWEAR

EN345 (200 Joules) – All safety footwear, regardless of style, should have steel toe-caps conforming to EN345 (200 Joules). This means the steel toe-cap will withstand the impact of 20kg in weight falling on to the toes from a height of 10.2 metres. This standard also relates to compression protection corresponding to approximately 1.5 tonnes resting on the toe area. Wearing appropriate protection when working in foundries or when welding is essential, but ensure that you have the correct product for your particular environment and work.
  • EN470 Part 1 – specification for use in welding and similar activities.
  • EN531 – specification for industrial workers exposed to heat.

HIGH VISIBILITY GARMENTS

All high visibility garments should meet the current requirements of The Safety at Street Work and Road Works Code of Practice.
  • EN471 Class 3 – is the highest protection level (maximum protection). This level of protection should be worn on trunk roads and all other roads forming the Primary Route Network (PRN), roads displaying green/blue directional signs and all other roads where the speed limit is 40mph and above.
  • EN471 Class 2 – provides intermediate protection (medium visibility) and is the minimum requirement when working on all roads where the speed limit is less than 40mph.
  • EN471 Class 1 – offers the lowest level of protection and should be only worn in areas of minimal risk, possibly off road situations such as transport depots.

WATERPROOF CLOTHING

  • EN343 – is the code relating to waterproof garments. But these garments are also available in three classifications.
  • EN343 Class 3 – affords the highest level of foul weather protection.
  • EN343 Class 2 – will provide an intermediate level of foul weather protection.
  • EN343 Class 1 - provides the lowest level of foul weather protection.

HEAD PROTECTION

There are two types of protective headgear that provide two different levels of protection.
  • EN397 – relates to the industrial safety helmet that will protect against falling objects.
  • EN812 – will normally be found on baseball-style caps with an inner scalpguard liner to protect against the accidental scraping and bumping of the head. This type of product is not to be worn if there is a risk of being struck on the head by falling objects.

PROTECTION FROM NOISE

  • EN352 – is the minimum requirement under current European legislation for ear defenders and ear plugs.

EYE PROTECTION

  • EN166 – represents the minimum requirement for safety goggles and spectacles as laid down by European directives.

SAFETY HARNESS

Safety harnesses for working at height should always have the following codes.
  • EN361 – is the minimum standard required under current European legislation for a full body safety harness.
  • EN354 – relates to the lanyard used in PPE worn for preventing falls when working at height.

GLOVES

  • EN388 – is the classification for gloves designed to protect the hands against mechanical risks
  • EN407 – Protective gloves against thermal hazards (heat and/or fire)
  • EN511 – Protective gloves against cold
  • EN374 – Protective gloves against chemicals and micro-organisms
  • EN12477 – is the standard for protective gauntlets for welders.

COLD STORE CLOTHING

  • EN342 – is the minimum standard for garments worn for protection against cool environments.

PROTECTIVE CLOTHING

  • EN1149 Class 1 – Electrostatic properties - Part 1 : test method for measurement of surface resistivity.

KNEE PROTECTION

  • EN14404 – Personal Protective Equipment - knee protectors for work in the kneeling position.

CHAINSAW PROTECTION

  • EN381 – is the classification for protective clothing for users of hand-held chainsaws. There are 11 separate parts to this particular classification that cover different garments e.g. boots, gloves, jackets, trousers etc.
About
Contact Us
About Us
Our Facility
Testimonials
My Account
Create a Quick Access Account
Services
Embroidery
Heat Transfer
Logo Application
Individual Personalised Bagging
Site Visits
Mailing List
Clearance
Promotions
Information
Digital Catalogue
EN Standards
Privacy & Data Protection Policy
Terms & Conditions
FAQs
Brands
Delivery
Site Map
News
Credit Application Form
Home
Look Smart Work Smarter

Tir Llwyd Enterprise Park
Kinmel Bay, Rhyl
North Wales
LL18 5JZ
T: 01745 362500
F: 01745 362501
Or Email Us

Facebook Twitter

© Samco Industrial Merchants 2018
Built by Pindar Creative.